Shop The worlds best carbon Fiber kart parts and gain the competitive edge with time cutting, weight saving parts including floor trays, exhaust brackets, laptimer brackets, sprocket protectors, torsion bars and more.
We are the world leaders in carbon fiber kart parts. Catering for Tonykart, CRG, Birelart, Madcroc, Intrepid, Praga, Airkart and more with tried and tested components over years of feedback and race testing resulting in proven performance and weight saving parts including floor trays, exhaust brackets, torsion bars, sprocket protectors, seat stays, laptimer brackets, airbox brackets, nassua panel brackets and more. Use our dedicated search bar below or browse our list of carbon fiber kart parts in the shop.
-
Bambino Carbon Fiber Upper Nassau brackets x2
Autoclave Carbon Fiber Bambino Upper Nassau brackets Materials used: Xpreg XC110 2×2 twill 3k 210g , Xpreg XC130 Unidirectional 300g, Xpreg XC130 2X2 twill 12k 450g Thickness: 3.2mm Resin Type: Epoxy Process: Autoclave Cured @ 120 degrees C Max service temperature: 130 degrees C Fitment: Bambino Karts weight properties: Original 140g / Carbon 40g weight…
£80.00 -
Tonykart M8/M5 Cadet lower Nassau panel bracket
Autoclave Carbon Fiber M8/M5 Lower Nassau panel bracket Materials used: Xpreg XC110 2×2 twill 3k 210g , Xpreg XC130 Unidirectional 300g, Xpreg XC130 2X2 twill 12k 450g Thickness: 3.2mm Resin Type: Epoxy Process: Autoclave Cured @ 120 degrees C Max service temperature: 130 degrees C Fitment: Tonykart Cadet M8/M5 bodywork, Rookie 950. weight properties: Original…
£40.00 -
Tonykart M8 Cadet Carbon Fiber Nassau panel kit
Autoclave Carbon Fiber M8 Nassau brackets set Materials used: Xpreg XC110 2×2 twill 3k 210g , Xpreg XC130 Unidirectional 300g, Xpreg XC130 2X2 twill 12k 450g Thickness: 3.2mm Resin Type: Epoxy Process: Autoclave Cured @ 120 degrees C Max service temperature: 130 degrees C Fitment: Tonykart Cadet with M8/M5 bodywork Rookie 950 weight properties: Original…
£130.00 -
Tonykart Cadet M8 Carbon fiber upper Nassau brackets x2
Autoclave Carbon Fiber M8 Nassau brackets Materials used: Xpreg XC110 2×2 twill 3k 210g , Xpreg XC130 Unidirectional 300g, Xpreg XC130 2X2 twill 12k 450g Thickness: 3.2mm Resin Type: Epoxy Process: Autoclave Cured @ 120 degrees C Max service temperature: 130 degrees C Fitment: Tonykart Cadet M8 Bodywork weight properties: Original 250g / Carbon 50g…
£90.00 -
Carbon fiber radiator support bars 19cm x 1.2cm
2x Carbon fiber radiator support bars, 19.5cm long 1.2cm diameter, M6 threads both ends, 2x M6 threads across the bar face. (Distance of 2x centre threads can be tailored and length can also be tailored) Autoclave Carbon fiber bars with M6 threads for use with Kz shifter kart engines, radiators. Materials used: Xpreg XC110 2×2…
£75.00 -
Mach1 Carbon fiber floor tray
Mach1 Carbon Fiber Floor tray/pan Materials used: Pyrofil Tr30s 3k 2×2 twill 210g stabilised, Lantor soric 2mm core media Resin Type: Epoxy Process: Resin infusion, Post Infusion Cure @ 100 degrees c Max service temperature: 110 degrees C Fitment: Mach1 Senior karts weight properties: Super soft 190g / Standard 460g / Stiff 510g ( Original…
Price range: £190.00 through £210.00 -
Airkart carbon fiber torsion bar 225x30mm
Carbon Fiber Torsion bar x1 Materials used: Xpreg XC110 2×2 3k, Xpreg XC130 2X2 12k, Xpreg XC130 Unidirectional 300g Thickness: 0.7-1.4mm dependent on stiffness Resin Type: Epoxy Process: Autoclave Cured @ 120 degrees c / Varying Fiber orientations and thickness to match factory bars Torsion levels Max service temperature: 130 degrees C Fitment: All karts,…
£50.00 -
Haase/Corsa carbon fiber torsion bar 270x30mm
Carbon Fiber Torsion bar x1 Materials used: Xpreg XC110 2×2 3k, Xpreg XC130 2X2 12k, Xpreg XC130 Unidirectional 300g Thickness: 0.7-1.4mm dependent on stiffness Resin Type: Epoxy Process: Autoclave Cured @ 120 degrees c / Varying Fiber orientations and thickness to match factory bars Torsion levels Max service temperature: 130 degrees C Fitment: All karts,…
£70.00 -
Haase/Corsa carbon fiber torsion bar210x28mm
Carbon Fiber Torsion bar x1 Materials used: Xpreg XC110 2×2 3k, Xpreg XC130 2X2 12k, Xpreg XC130 Unidirectional 300g Thickness: 0.7-1.4mm dependent on stiffness Resin Type: Epoxy Process: Autoclave Cured @ 120 degrees c / Varying Fiber orientations and thickness to match factory bars Torsion levels Max service temperature: 130 degrees C Fitment: All karts,…
£50.00
We utilise carbon fiber prepreg with tried and tested manufacturing principles, a dedicated C.N.C workshop and tools to provide the lightest and strongest parts available across the karting industry to revolutionize kart racing to match that of higher classes of motorsport where they utilize carbon fiber for safety and performance purposes. Follow our Facebook page below for updates on all new parts including some stunning images of our parts in use.